Hospital Privacy Curtains in San Francisco

Selecting clinical fabric that survives thermal washing

The difference between an inherently flame-resistant (IFR) privacy curtain and one with a topical treatment only matters on laundry day. A clinical environment demands a thermal wash—often around 71 °C—to clear pathogens. That temperature strips a topical flame-retardant finish after a handful of cycles, turning a compliant curtain into a fire risk. An IFR fabric is woven from polymers that do not burn, meaning its fire rating survives the life of the curtain.

For multi-bed outpatient clinics and dialysis units with high patient turnover, an antimicrobial fabric specification offers an additional layer of protection between changes.

Sizing to the track, not the floor plan

A curtain that drags on the floor is an infection control failure, and one that stops short of the track is useless. We measure from the installed track height, not the structural ceiling, because a suspended grid or exposed utilities will change the clearance room by room. The curtain must also clear the sprinkler head according to NFPA 13 rules, meaning the open mesh section must extend at least 22 inches down from the ceiling.

Ordering a standard height and hoping it fits often leads to costly delays when the bay fails inspection. You can read our exact process on how to measure correctly. Curved and bent runs require factory-bent track cut to a specific radius, because track bent on site is the usual cause of curtains that bind halfway along the run.

Compliance documentation for California inspections

Passing an NFPA 701 flame test is not enough for a public building in California. The fabric must be registered with the Office of the State Fire Marshal (OSFM) under Title 19 of the California Code of Regulations. When your facility is inspected by the San Francisco Fire Department, they look for that specific OSFM certificate alongside your written rotation policy.

We supply the exact fire documentation and a room-by-room schedule with the handover, so your paperwork matches exactly what is hanging on the track.

Repeat orders and when a curtain arrives wrong

A privacy curtain is finished when it tears, when the mesh separates from the header, or when the fabric is permanently stained—not just when it is dirty. When that happens, or when you need a second set to keep the bay active while the first is laundered, matching a repeat order shouldn't be a struggle. Most facilities buy a second set cut to the same track, making the swap a ten-minute job for their own team.

If a curtain arrives cut to the wrong length or with a mismatched header, we do not ask you to ship it back and wait. A wrong size is remade to the correct measurements, and we come and hang it, because keeping an acute care bed closed over a supplier error is unacceptable.

A local supply and installation service

Everything above is the baseline for a competent vendor. What separates us from national suppliers who simply ship a box of curtains is our physical presence.

We survey the San Francisco healthcare estate in person. We measure the obstructions, determine the track bends, and install the hardware so you don't have to pull your own facilities team off maintenance duties. Whether dealing with 1989 seismic bracing in a mid-century ward block or a modern multi-storey outpatient clinic, we ensure the curtain actually fits the space it was ordered for.